MDB Module, Harnesses, and Coin Changer Direct - Snack, Food, Coffee, Ice Cream, Soda
These easy to install module kits convert a vendor originally configured for a dumb Mech (12 pin or 15 pin - 24v or 115v) to the MDB interface. The original changer is unplugged. A connector from the module is plugged into the now open socket. In some cases, the original validator can be reused. In all cases, a Mars MDB 4 or 5 tube changer must be installed. The MDB components are then connected to the module in this order: credit card reader / bill validator / coin changer. The maximum vend price when using a aftermarket kit is $12.00. These module kits have been testd with Canteloupe G10, Nayax Amit, and Nayax Touch readers. They have not been tested with Pay Range.
In some cases, the machine can be updated to MDB by updating the eprom and installing a MDB harness. In some cases, a programming keypad and validator plexi may be required as well.
If you are not experienced installing kits, a local vending technician should be hired to assist with the installation.