Cigarette Machine Pricing Update Kit For Validator
This pricing update board is desinged for cigartte machines that utilize a Mars TRC6800H or Coinco changer to set the price. This product is not recommended for machines with control boards, as no testing was performed.
The interface board outputs a single pulse after receiving 10-25 input pulses from a 120V validator. The board has a yellow program chip, and dips 6 and 8 must be on. At power-up, the green LED will blink 4 times.
With dip switches 1-4 off, after 10 pulses are received, a single pulse is sent to the host. To increase the amount of pulses, turn switches 1-4 on and add the pulse values together. Power must be off when changing switches.
#1 on adds 1 pulse
#2 on adds 2 pulses
#3 on adds 4 pulses
#4 on adds 8 pulses
If #1 and #2 on 13 pulses are required for a vend, the cost is $13.00
If this board is installed in a machine that has a display, it is recommended that the display be hidden as it may confuse customers. It will not increment when each bill is accepted.
When installing in a cigarette machine with a single price coin changer, set the vend price to $1.00 = price dip switches 2 (.20) and 4 (.80) on. The vend price (dollar increments only) is now set using the dip switches on the board.
This kit is intended for installation by a trained service professional.
If this board is attached to a Mars validator with a harness from a TC6800H changer, the harness is not the type designed for a soda vending machine with an escrow feature. If you have this version of the harness, it must be replaced with a non-escrow version, as the kit will not function otherwise. This harness can be found here.
